How to update the speed trap detector database and Firmware using the Aguri Cam app and your Android Smart Phone.
Download and install the Aguri Cam app from the Google Play Store.
To update the speed trap database, the Aguri Cam app will first need to connect to our data server and download the latest version of the database to your Smart Phone. You will then need to connect your phone to the DX2000 to transfer the latest database to it. However the first time you do this, you will need to connect your phone to the DX2000 so that app can sync with the device to find out what version of software and database is already installed on the unit.
Syncing the Aguri Cam app with your DX2000. Android Smart Phone only.
- Press the menu button on your DX2000 twice to highlight Wi-Fi and press the OK button to select it. Press the Down button to highlight On and press the OK button to confirm.
- Go to Settings on your Smart Phone and switch Wi-Fi on. Look for Aguri (The DX2000’s Wi-Fi connection) in the list of Available networks and tap on it to select it. If you have not previously connected your phone to the DX2000, you will be asked to enter the password for it. This should be displayed on the screen of the DX2000 itself and will be ‘12345678’ unless previously changed.
Updating the speed trap database. Android Smart Phone Only.
- Ensure that your Smart Phone is connected to the internet by Wi-Fi.
- Launch the Aguri Cam app and tap on Update. The app will then automatically check for any updates available and download them to your phone.
- Press the menu button on your DX2000 twice to highlight Wi-Fi and press the OK button to select it. Press the Down button to highlight On and press the OK button to confirm.
- Go to Settings on your Smart Phone and switch Wi-Fi on. Look for Aguri (The DX2000’s Wi-Fi connection) in the list of Available networks and tap on it to select it. If you have not previously connected your phone to the DX2000, you will be asked to enter the password for it. This should be displayed on the screen of the DX2000 itself and will be ‘12345678’ unless previously changed.
- Go back to the Aguri Cam app and tap on Upload Firmware. The app will then send the new data to your DX2000 and the DX2000 will then update itself automatically.
Exit the app when finished.
User note. As Android phones cannot be paired to a 3rd party device using Wi-Fi at the same time as connecting to the internet using 4G, it is necessary to download the data to your phone first before disconnecting your phone from the internet using Wi-Fi and then reconnecting it to the DX2000 to transfer the data across.
Related products
Speed camera detectors & radar detectors
Dash cams
Reversing cameras
Vehicle tracking devices
